将流浪机器连接到 virtualBox
Connect vagrant machine to virtualBox
您好，我正在尝试通过 virtualBox 使用 vagrant 设置我的 git Bash 环境，但我没有成功。我正在尝试打开 localhost:8080/xxxx，但它只是加载，我认为这是因为这个
我有最新版本的 vagrant 和 virtualBox。
我的命令：
"cd fullstack/vagrant",
"vagrant up"
但后来我得到以下信息：
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'bento/ubuntu-16.04' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
==> default: Forwarding ports...
default: 8000 (guest) => 8000 (host) (adapter 1)
default: 8080 (guest) => 8080 (host) (adapter 1)
default: 5000 (guest) => 5000 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key Timed out while waiting for the machine to boot. This means that Vagrant was unable to communicate
with the guest machine within the configured ("config.vm.boot_timeout"
value) time period.
If you look above, you should be able to see the error(s) that Vagrant
had when attempting to connect to the machine. These errors are
usually good hints as to what may be wrong.
If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes. Verify
that authentication configurations are also setup properly, as well.
If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.
已解决。对于任何有类似问题的人：
我重新安装了这两个程序，但这次我在 vagrant 中初始化了一个盒子。我刚刚从这里挑选了最受欢迎的：https://app.vagrantup.com/boxes/search
您好，我正在尝试通过 virtualBox 使用 vagrant 设置我的 git Bash 环境，但我没有成功。我正在尝试打开 localhost:8080/xxxx，但它只是加载，我认为这是因为这个
我有最新版本的 vagrant 和 virtualBox。 我的命令： "cd fullstack/vagrant", "vagrant up"
但后来我得到以下信息：
Bringing machine 'default' up with 'virtualbox' provider... ==> default: Checking if box 'bento/ubuntu-16.04' is up to date... ==> default: Clearing any previously set forwarded ports... ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat ==> default: Forwarding ports... default: 8000 (guest) => 8000 (host) (adapter 1) default: 8080 (guest) => 8080 (host) (adapter 1) default: 5000 (guest) => 5000 (host) (adapter 1) default: 22 (guest) => 2222 (host) (adapter 1) ==> default: Running 'pre-boot' VM customizations... ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2222 default: SSH username: vagrant default: SSH auth method: private key Timed out while waiting for the machine to boot. This means that Vagrant was unable to communicate with the guest machine within the configured ("config.vm.boot_timeout" value) time period.
If you look above, you should be able to see the error(s) that Vagrant had when attempting to connect to the machine. These errors are usually good hints as to what may be wrong.
If you're using a custom box, make sure that networking is properly working and you're able to connect to the machine. It is a common problem that networking isn't setup properly in these boxes. Verify that authentication configurations are also setup properly, as well.
If the box appears to be booting properly, you may want to increase the timeout ("config.vm.boot_timeout") value.
已解决。对于任何有类似问题的人：
我重新安装了这两个程序，但这次我在 vagrant 中初始化了一个盒子。我刚刚从这里挑选了最受欢迎的：https://app.vagrantup.com/boxes/search