在 Hyperledger-Fabric 中从 leveldb 更改为 couchdb 时是否需要更改端口号
Does the port numbers needs to be changed when changing from leveldb to couchdb in Hyperledger-Fabric
我正在使用 Hyperledger 1.1 和 Chainhero SDK 开发区块链应用程序的前端。将 Hyperledger 版本从 1.4 更改为 1.1（因为 SDK 缺少对 1.4 的支持）并将默认数据库从 levelDb 更改为 couchDb 后，它将不会初始化。从 levelDb 转换为 couchDb 时是否需要更改端口？
我一直在研究 Hyperledger (HL) 中的链代码。我用链代码完成了后端开发，现在正在使用 Chainhero SDK 开发前端。由于此 SDK 仅支持 HL 1.1，因此我需要更改 HL 版本。在此之后我忘记更新版本控制，现在网络无法启动并带有以下错误输出：
Unable to initialize the Fabric SDK: failed to make admin join channel: join channel failed: SendProposal failed: Transaction processing for endorser [localhost:7051]: Endorser Client Status Code: (2) CONNECTION_FAILED. Description: dialing connection timed out [localhost:7051]
从 levelDb 更改为 couchDb 时，我遵循了 this guide。其中没有说明有关更改端口的任何内容。
我预计它会初始化，但似乎有问题。我不确定这是否有助于增加时间，还是端口有问题？
config.yaml
name: "heroes-service-network"
#
# Schema version of the content. Used by the SDK to apply the corresponding parsing rules.
#
version: 1.0.0
#
# The client section used by GO SDK.
#
client:
# Which organization does this application instance belong to? The value must be the name of an org
# defined under "organizations"
organization: org1
logging:
level: info
# Global configuration for peer, event service and orderer timeouts
# if this this section is omitted, then default values will be used (same values as below)
# peer:
# timeout:
# connection: 10s
# response: 180s
# discovery:
# # Expiry period for discovery service greylist filter
# # The channel client will greylist peers that are found to be offline
# # to prevent re-selecting them in subsequent retries.
# # This interval will define how long a peer is greylisted
# greylistExpiry: 10s
# eventService:
# # Event service type (optional). If not specified then the type is automatically
# # determined from channel capabilities.
# type: (deliver|eventhub)
# the below timeouts are commented out to use the default values that are found in
# "pkg/fab/endpointconfig.go"
# the client is free to override the default values by uncommenting and resetting
# the values as they see fit in their config file
# timeout:
# connection: 15s
# registrationResponse: 15s
# orderer:
# timeout:
# connection: 15s
# response: 15s
# global:
# timeout:
# query: 180s
# execute: 180s
# resmgmt: 180s
# cache:
# connectionIdle: 30s
# eventServiceIdle: 2m
# channelConfig: 30m
# channelMembership: 30s
# discovery: 10s
# selection: 10m
# Root of the MSP directories with keys and certs.
cryptoconfig:
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config
# Some SDKs support pluggable KV stores, the properties under "credentialStore"
# are implementation specific
credentialStore:
path: /tmp/heroes-service-store
# [Optional]. Specific to the CryptoSuite implementation used by GO SDK. Software-based implementations
# requiring a key store. PKCS#11 based implementations does not.
cryptoStore:
path: /tmp/heroes-service-msp
# BCCSP config for the client. Used by GO SDK.
BCCSP:
security:
enabled: true
default:
provider: "SW"
hashAlgorithm: "SHA2"
softVerify: true
level: 256
tlsCerts:
# [Optional]. Use system certificate pool when connecting to peers, orderers (for negotiating TLS) Default: false
systemCertPool: false
# [Optional]. Client key and cert for TLS handshake with peers and orderers
client:
keyfile:
certfile:
#
# [Optional]. But most apps would have this section so that channel objects can be constructed
# based on the content below. If an app is creating channels, then it likely will not need this
# section.
#
channels:
# name of the channel
chainhero:
# Required. list of orderers designated by the application to use for transactions on this
# channel. This list can be a result of access control ("org1" can only access "ordererA"), or
# operational decisions to share loads from applications among the orderers. The values must
# be "names" of orgs defined under "organizations/peers"
# deprecated: not recommended, to override any orderer configuration items, entity matchers should be used.
# orderers:
# - orderer.example.com
# Required. list of peers from participating orgs
peers:
peer0.org1.hf.chainhero.io:
# [Optional]. will this peer be sent transaction proposals for endorsement? The peer must
# have the chaincode installed. The app can also use this property to decide which peers
# to send the chaincode install request. Default: true
endorsingPeer: true
# [Optional]. will this peer be sent query proposals? The peer must have the chaincode
# installed. The app can also use this property to decide which peers to send the
# chaincode install request. Default: true
chaincodeQuery: true
# [Optional]. will this peer be sent query proposals that do not require chaincodes, like
# queryBlock(), queryTransaction(), etc. Default: true
ledgerQuery: true
# [Optional]. will this peer be the target of the SDK's listener registration? All peers can
# produce events but the app typically only needs to connect to one to listen to events.
# Default: true
eventSource: true
peer1.org1.hf.chainhero.io:
policies:
#[Optional] options for retrieving channel configuration blocks
queryChannelConfig:
#[Optional] min number of success responses (from targets/peers)
minResponses: 1
#[Optional] channel config will be retrieved for these number of random targets
maxTargets: 1
#[Optional] retry options for query config block
retryOpts:
#[Optional] number of retry attempts
attempts: 5
#[Optional] the back off interval for the first retry attempt
initialBackoff: 500ms
#[Optional] the maximum back off interval for any retry attempt
maxBackoff: 5s
#[Optional] he factor by which the initial back off period is exponentially incremented
backoffFactor: 2.0
#
# list of participating organizations in this network
#
organizations:
org1:
mspid: org1.hf.chainhero.io
cryptoPath: peerOrganizations/org1.hf.chainhero.io/users/{userName}@org1.hf.chainhero.io/msp
peers:
- peer0.org1.hf.chainhero.io
- peer1.org1.hf.chainhero.io
# [Optional]. Certificate Authorities issue certificates for identification purposes in a Fabric based
# network. Typically certificates provisioning is done in a separate process outside of the
# runtime network. Fabric-CA is a special certificate authority that provides a REST APIs for
# dynamic certificate management (enroll, revoke, re-enroll). The following section is only for
# Fabric-CA servers.
certificateAuthorities:
- ca.org1.hf.chainhero.io
#
# List of orderers to send transaction and channel create/update requests to. For the time
# being only one orderer is needed. If more than one is defined, which one get used by the
# SDK is implementation specific. Consult each SDK's documentation for its handling of orderers.
#
orderers:
orderer.hf.chainhero.io:
url: localhost:7050
# these are standard properties defined by the gRPC library
# they will be passed in as-is to gRPC client constructor
grpcOptions:
ssl-target-name-override: orderer.hf.chainhero.io
# These parameters should be set in coordination with the keepalive policy on the server,
# as incompatible settings can result in closing of connection.
# When duration of the 'keep-alive-time' is set to 0 or less the keep alive client parameters are disabled
keep-alive-time: 0s
keep-alive-timeout: 20s
keep-alive-permit: false
fail-fast: false
# allow-insecure will be taken into consideration if address has no protocol defined, if true then grpc or else grpcs
allow-insecure: false
tlsCACerts:
# Certificate location absolute path
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config/ordererOrganizations/hf.chainhero.io/tlsca/tlsca.hf.chainhero.io-cert.pem
#
# List of peers to send various requests to, including endorsement, query
# and event listener registration.
#
peers:
peer0.org1.hf.chainhero.io:
# this URL is used to send endorsement and query requests
url: localhost:7051
# eventUrl is only needed when using eventhub (default is delivery service)
eventUrl: localhost:7053
grpcOptions:
ssl-target-name-override: peer0.org1.hf.chainhero.io
# These parameters should be set in coordination with the keepalive policy on the server,
# as incompatible settings can result in closing of connection.
# When duration of the 'keep-alive-time' is set to 0 or less the keep alive client parameters are disabled
keep-alive-time: 0s
keep-alive-timeout: 20s
keep-alive-permit: false
fail-fast: false
# allow-insecure will be taken into consideration if address has no protocol defined, if true then grpc or else grpcs
allow-insecure: false
tlsCACerts:
# Certificate location absolute path
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config/peerOrganizations/org1.hf.chainhero.io/tlsca/tlsca.org1.hf.chainhero.io-cert.pem
peer1.org1.hf.chainhero.io:
# this URL is used to send endorsement and query requests
url: localhost:8051
# eventUrl is only needed when using eventhub (default is delivery service)
eventUrl: localhost:8053
grpcOptions:
ssl-target-name-override: peer1.org1.hf.chainhero.io
# These parameters should be set in coordination with the keepalive policy on the server,
# as incompatible settings can result in closing of connection.
# When duration of the 'keep-alive-time' is set to 0 or less the keep alive client parameters are disabled
keep-alive-time: 0s
keep-alive-timeout: 20s
keep-alive-permit: false
fail-fast: false
# allow-insecure will be taken into consideration if address has no protocol defined, if true then grpc or else grpcs
allow-insecure: false
tlsCACerts:
# Certificate location absolute path
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config/peerOrganizations/org1.hf.chainhero.io/tlsca/tlsca.org1.hf.chainhero.io-cert.pem
#
# Fabric-CA is a special kind of Certificate Authority provided by Hyperledger Fabric which allows
# certificate management to be done via REST APIs. Application may choose to use a standard
# Certificate Authority instead of Fabric-CA, in which case this section would not be specified.
#
certificateAuthorities:
ca.org1.hf.chainhero.io:
url: http://localhost:7054
# Fabric-CA supports dynamic user enrollment via REST APIs. A "root" user, a.k.a registrar, is
# needed to enroll and invoke new users.
httpOptions:
verify: false
registrar:
enrollId: admin
enrollSecret: adminpw
# [Optional] The optional name of the CA.
caName: ca.org1.hf.chainhero.io
tlsCACerts:
# Certificate location absolute path
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config/peerOrganizations/org1.hf.chainhero.io/ca/ca.org1.hf.chainhero.io-cert.pem
entityMatchers:
peer:
- pattern: (\w*)peer0.org1.hf.chainhero.io(\w*)
urlSubstitutionExp: localhost:7051
eventUrlSubstitutionExp: localhost:7053
sslTargetOverrideUrlSubstitutionExp: peer0.org1.hf.chainhero.io
mappedHost: peer0.org1.hf.chainhero.io
- pattern: (\w*)peer1.org1.hf.chainhero.io(\w*)
urlSubstitutionExp: localhost:8051
eventUrlSubstitutionExp: localhost:8053
sslTargetOverrideUrlSubstitutionExp: peer1.org1.hf.chainhero.io
mappedHost: peer1.org1.hf.chainhero.io
orderer:
- pattern: (\w*)orderer.hf.chainhero.io(\w*)
urlSubstitutionExp: localhost:7050
sslTargetOverrideUrlSubstitutionExp: orderer.hf.chainhero.io
mappedHost: orderer.hf.chainhero.io
certificateAuthorities:
- pattern: (\w*)ca.org1.hf.chainhero.io(\w*)
urlSubstitutionExp: http://localhost:7054
mappedHost: ca.org1.hf.chainhero.io
docker-compose.yaml
version: '2'
networks:
default:
services:
orderer.hf.chainhero.io:
image: hyperledger/fabric-orderer:x86_64-1.1.0
container_name: orderer.hf.chainhero.io
environment:
- ORDERER_GENERAL_LOGLEVEL=debug
- ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
- ORDERER_GENERAL_LISTENPORT=7050
- ORDERER_GENERAL_GENESISPROFILE=ChainHero
- ORDERER_GENERAL_GENESISMETHOD=file
- ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
- ORDERER_GENERAL_LOCALMSPID=hf.chainhero.io
- ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
- ORDERER_GENERAL_TLS_ENABLED=true
- ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
- ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
- ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
working_dir: /opt/gopath/src/github.com/hyperledger/fabric-1.1.0
command: orderer
volumes:
- ./artifacts/orderer.genesis.block:/var/hyperledger/orderer/orderer.genesis.block
- ./crypto-config/ordererOrganizations/hf.chainhero.io/orderers/orderer.hf.chainhero.io/msp:/var/hyperledger/orderer/msp
- ./crypto-config/ordererOrganizations/hf.chainhero.io/orderers/orderer.hf.chainhero.io/tls:/var/hyperledger/orderer/tls
ports:
- 7050:7050
networks:
default:
aliases:
- orderer.hf.chainhero.io
ca.org1.hf.chainhero.io:
image: hyperledger/fabric-ca:x86_64-1.1.0
container_name: ca.org1.hf.chainhero.io
environment:
- FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
- FABRIC_CA_SERVER_CA_NAME=ca.org1.hf.chainhero.io
- FABRIC_CA_SERVER_CA_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.hf.chainhero.io-cert.pem
- FABRIC_CA_SERVER_CA_KEYFILE=/etc/hyperledger/fabric-ca-server-config/5da5c8049a9ec349ec4447c82a9c0f7db75b84012a78954ef083a9c9e4a9fa25_sk
- FABRIC_CA_SERVER_TLS_ENABLED=true
- FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.hf.chainhero.io-cert.pem
- FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/5da5c8049a9ec349ec4447c82a9c0f7db75b84012a78954ef083a9c9e4a9fa25_sk
ports:
- 7054:7054
command: sh -c 'fabric-ca-server start -b admin:adminpw -d'
volumes:
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/ca/:/etc/hyperledger/fabric-ca-server-config
networks:
default:
aliases:
- ca.org1.hf.chainhero.io
peer0.org1.hf.chainhero.io:
image: hyperledger/fabric-peer:x86_64-1.1.0
container_name: peer0.org1.hf.chainhero.io
environment:
- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
- CORE_VM_DOCKER_ATTACHSTDOUT=true
- CORE_LOGGING_LEVEL=DEBUG
- CORE_PEER_NETWORKID=chainhero
- CORE_PEER_PROFILE_ENABLED=true
- CORE_PEER_TLS_ENABLED=true
- CORE_PEER_TLS_CERT_FILE=/var/hyperledger/tls/server.crt
- CORE_PEER_TLS_KEY_FILE=/var/hyperledger/tls/server.key
- CORE_PEER_TLS_ROOTCERT_FILE=/var/hyperledger/tls/ca.crt
- CORE_PEER_ID=peer0.org1.hf.chainhero.io
- CORE_PEER_ADDRESSAUTODETECT=true
- CORE_PEER_ADDRESS=peer0.org1.hf.chainhero.io:7051
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.hf.chainhero.io:7051
- CORE_PEER_GOSSIP_USELEADERELECTION=true
- CORE_PEER_GOSSIP_ORGLEADER=false
- CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
- CORE_PEER_LOCALMSPID=org1.hf.chainhero.io
- CORE_PEER_MSPCONFIGPATH=/var/hyperledger/msp
- CORE_PEER_TLS_SERVERHOSTOVERRIDE=peer0.org1.hf.chainhero.io
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
command: peer node start
volumes:
- /var/run/:/host/var/run/
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/peers/peer0.org1.hf.chainhero.io/msp:/var/hyperledger/msp
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/peers/peer0.org1.hf.chainhero.io/tls:/var/hyperledger/tls
ports:
- 7051:7051
- 7053:7053
depends_on:
- orderer.hf.chainhero.io
links:
- orderer.hf.chainhero.io
networks:
default:
aliases:
- peer0.org1.hf.chainhero.io
peer1.org1.hf.chainhero.io:
image: hyperledger/fabric-peer:x86_64-1.1.0
container_name: peer1.org1.hf.chainhero.io
environment:
- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
- CORE_VM_DOCKER_ATTACHSTDOUT=true
- CORE_LOGGING_LEVEL=DEBUG
- CORE_PEER_NETWORKID=chainhero
- CORE_PEER_PROFILE_ENABLED=true
- CORE_PEER_TLS_ENABLED=true
- CORE_PEER_TLS_CERT_FILE=/var/hyperledger/tls/server.crt
- CORE_PEER_TLS_KEY_FILE=/var/hyperledger/tls/server.key
- CORE_PEER_TLS_ROOTCERT_FILE=/var/hyperledger/tls/ca.crt
- CORE_PEER_ID=peer1.org1.hf.chainhero.io
- CORE_PEER_ADDRESSAUTODETECT=true
- CORE_PEER_ADDRESS=peer1.org1.hf.chainhero.io:7051
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.hf.chainhero.io:7051
- CORE_PEER_GOSSIP_USELEADERELECTION=true
- CORE_PEER_GOSSIP_ORGLEADER=false
- CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
- CORE_PEER_LOCALMSPID=org1.hf.chainhero.io
- CORE_PEER_MSPCONFIGPATH=/var/hyperledger/msp
- CORE_PEER_TLS_SERVERHOSTOVERRIDE=peer1.org1.hf.chainhero.io
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
command: peer node start
volumes:
- /var/run/:/host/var/run/
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/peers/peer1.org1.hf.chainhero.io/msp:/var/hyperledger/msp
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/peers/peer1.org1.hf.chainhero.io/tls:/var/hyperledger/tls
ports:
- 8051:7051
- 8053:7053
depends_on:
- orderer.hf.chainhero.io
links:
- orderer.hf.chainhero.io
networks:
default:
aliases:
- peer1.org1.hf.chainhero.io
docker-撰写-couch.yaml
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
version: '2'
services:
couchdb0:
container_name: couchdb0
image: hyperledger/fabric-couchdb
environment:
- COUCHDB_USER=
- COUCHDB_PASSWORD=
# Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
# for example map it to utilize Fauxton User Interface in dev environments.
ports:
- "5984:5984"
peer0.org1.hf.chainhero.io:
environment:
- CORE_LEDGER_STATE_STATEDATABASE=CouchDB
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:7051
- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
depends_on:
- couchdb0
couchdb1:
container_name: couchdb1
image: hyperledger/fabric-couchdb
environment:
- COUCHDB_USER=
- COUCHDB_PASSWORD=
# Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
# for example map it to utilize Fauxton User Interface in dev environments.
ports:
- "6984:5984"
peer1.org1.hf.chainhero.io:
environment:
- CORE_LEDGER_STATE_STATEDATABASE=CouchDB
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb1:5984
- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
depends_on:
- couchdb1
couchdb2:
container_name: couchdb2
image: hyperledger/fabric-couchdb
environment:
- COUCHDB_USER=
- COUCHDB_PASSWORD=
# Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
# for example map it to utilize Fauxton User Interface in dev environments.
ports:
- "7984:5984"
# peer0.org2.example.com:
# environment:
# - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
# - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb2:5984
# - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
# - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
# depends_on:
# - couchdb2
#
# couchdb3:
# container_name: couchdb3
# image: hyperledger/fabric-couchdb
# environment:
# - COUCHDB_USER=
# - COUCHDB_PASSWORD=
# # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
# # for example map it to utilize Fauxton User Interface in dev environments.
# ports:
# - "8984:5984"
#
# peer1.org2.example.com:
# environment:
# - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
# - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb3:5984
# - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
# - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
# depends_on:
# - couchdb3
假设是 compose-docker-douch.yaml 中的端口有问题，我需要更改吗：
peer0.org1.hf.chainhero.io:
...
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:7051
到
peer0.org1.hf.chainhero.io:
...
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:5984
我正在使用 Hyperledger 1.1 和 Chainhero SDK 开发区块链应用程序的前端。将 Hyperledger 版本从 1.4 更改为 1.1（因为 SDK 缺少对 1.4 的支持）并将默认数据库从 levelDb 更改为 couchDb 后，它将不会初始化。从 levelDb 转换为 couchDb 时是否需要更改端口？
我一直在研究 Hyperledger (HL) 中的链代码。我用链代码完成了后端开发，现在正在使用 Chainhero SDK 开发前端。由于此 SDK 仅支持 HL 1.1，因此我需要更改 HL 版本。在此之后我忘记更新版本控制，现在网络无法启动并带有以下错误输出：
Unable to initialize the Fabric SDK: failed to make admin join channel: join channel failed: SendProposal failed: Transaction processing for endorser [localhost:7051]: Endorser Client Status Code: (2) CONNECTION_FAILED. Description: dialing connection timed out [localhost:7051]
从 levelDb 更改为 couchDb 时，我遵循了 this guide。其中没有说明有关更改端口的任何内容。
我预计它会初始化，但似乎有问题。我不确定这是否有助于增加时间，还是端口有问题？
config.yaml
name: "heroes-service-network"
#
# Schema version of the content. Used by the SDK to apply the corresponding parsing rules.
#
version: 1.0.0
#
# The client section used by GO SDK.
#
client:
# Which organization does this application instance belong to? The value must be the name of an org
# defined under "organizations"
organization: org1
logging:
level: info
# Global configuration for peer, event service and orderer timeouts
# if this this section is omitted, then default values will be used (same values as below)
# peer:
# timeout:
# connection: 10s
# response: 180s
# discovery:
# # Expiry period for discovery service greylist filter
# # The channel client will greylist peers that are found to be offline
# # to prevent re-selecting them in subsequent retries.
# # This interval will define how long a peer is greylisted
# greylistExpiry: 10s
# eventService:
# # Event service type (optional). If not specified then the type is automatically
# # determined from channel capabilities.
# type: (deliver|eventhub)
# the below timeouts are commented out to use the default values that are found in
# "pkg/fab/endpointconfig.go"
# the client is free to override the default values by uncommenting and resetting
# the values as they see fit in their config file
# timeout:
# connection: 15s
# registrationResponse: 15s
# orderer:
# timeout:
# connection: 15s
# response: 15s
# global:
# timeout:
# query: 180s
# execute: 180s
# resmgmt: 180s
# cache:
# connectionIdle: 30s
# eventServiceIdle: 2m
# channelConfig: 30m
# channelMembership: 30s
# discovery: 10s
# selection: 10m
# Root of the MSP directories with keys and certs.
cryptoconfig:
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config
# Some SDKs support pluggable KV stores, the properties under "credentialStore"
# are implementation specific
credentialStore:
path: /tmp/heroes-service-store
# [Optional]. Specific to the CryptoSuite implementation used by GO SDK. Software-based implementations
# requiring a key store. PKCS#11 based implementations does not.
cryptoStore:
path: /tmp/heroes-service-msp
# BCCSP config for the client. Used by GO SDK.
BCCSP:
security:
enabled: true
default:
provider: "SW"
hashAlgorithm: "SHA2"
softVerify: true
level: 256
tlsCerts:
# [Optional]. Use system certificate pool when connecting to peers, orderers (for negotiating TLS) Default: false
systemCertPool: false
# [Optional]. Client key and cert for TLS handshake with peers and orderers
client:
keyfile:
certfile:
#
# [Optional]. But most apps would have this section so that channel objects can be constructed
# based on the content below. If an app is creating channels, then it likely will not need this
# section.
#
channels:
# name of the channel
chainhero:
# Required. list of orderers designated by the application to use for transactions on this
# channel. This list can be a result of access control ("org1" can only access "ordererA"), or
# operational decisions to share loads from applications among the orderers. The values must
# be "names" of orgs defined under "organizations/peers"
# deprecated: not recommended, to override any orderer configuration items, entity matchers should be used.
# orderers:
# - orderer.example.com
# Required. list of peers from participating orgs
peers:
peer0.org1.hf.chainhero.io:
# [Optional]. will this peer be sent transaction proposals for endorsement? The peer must
# have the chaincode installed. The app can also use this property to decide which peers
# to send the chaincode install request. Default: true
endorsingPeer: true
# [Optional]. will this peer be sent query proposals? The peer must have the chaincode
# installed. The app can also use this property to decide which peers to send the
# chaincode install request. Default: true
chaincodeQuery: true
# [Optional]. will this peer be sent query proposals that do not require chaincodes, like
# queryBlock(), queryTransaction(), etc. Default: true
ledgerQuery: true
# [Optional]. will this peer be the target of the SDK's listener registration? All peers can
# produce events but the app typically only needs to connect to one to listen to events.
# Default: true
eventSource: true
peer1.org1.hf.chainhero.io:
policies:
#[Optional] options for retrieving channel configuration blocks
queryChannelConfig:
#[Optional] min number of success responses (from targets/peers)
minResponses: 1
#[Optional] channel config will be retrieved for these number of random targets
maxTargets: 1
#[Optional] retry options for query config block
retryOpts:
#[Optional] number of retry attempts
attempts: 5
#[Optional] the back off interval for the first retry attempt
initialBackoff: 500ms
#[Optional] the maximum back off interval for any retry attempt
maxBackoff: 5s
#[Optional] he factor by which the initial back off period is exponentially incremented
backoffFactor: 2.0
#
# list of participating organizations in this network
#
organizations:
org1:
mspid: org1.hf.chainhero.io
cryptoPath: peerOrganizations/org1.hf.chainhero.io/users/{userName}@org1.hf.chainhero.io/msp
peers:
- peer0.org1.hf.chainhero.io
- peer1.org1.hf.chainhero.io
# [Optional]. Certificate Authorities issue certificates for identification purposes in a Fabric based
# network. Typically certificates provisioning is done in a separate process outside of the
# runtime network. Fabric-CA is a special certificate authority that provides a REST APIs for
# dynamic certificate management (enroll, revoke, re-enroll). The following section is only for
# Fabric-CA servers.
certificateAuthorities:
- ca.org1.hf.chainhero.io
#
# List of orderers to send transaction and channel create/update requests to. For the time
# being only one orderer is needed. If more than one is defined, which one get used by the
# SDK is implementation specific. Consult each SDK's documentation for its handling of orderers.
#
orderers:
orderer.hf.chainhero.io:
url: localhost:7050
# these are standard properties defined by the gRPC library
# they will be passed in as-is to gRPC client constructor
grpcOptions:
ssl-target-name-override: orderer.hf.chainhero.io
# These parameters should be set in coordination with the keepalive policy on the server,
# as incompatible settings can result in closing of connection.
# When duration of the 'keep-alive-time' is set to 0 or less the keep alive client parameters are disabled
keep-alive-time: 0s
keep-alive-timeout: 20s
keep-alive-permit: false
fail-fast: false
# allow-insecure will be taken into consideration if address has no protocol defined, if true then grpc or else grpcs
allow-insecure: false
tlsCACerts:
# Certificate location absolute path
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config/ordererOrganizations/hf.chainhero.io/tlsca/tlsca.hf.chainhero.io-cert.pem
#
# List of peers to send various requests to, including endorsement, query
# and event listener registration.
#
peers:
peer0.org1.hf.chainhero.io:
# this URL is used to send endorsement and query requests
url: localhost:7051
# eventUrl is only needed when using eventhub (default is delivery service)
eventUrl: localhost:7053
grpcOptions:
ssl-target-name-override: peer0.org1.hf.chainhero.io
# These parameters should be set in coordination with the keepalive policy on the server,
# as incompatible settings can result in closing of connection.
# When duration of the 'keep-alive-time' is set to 0 or less the keep alive client parameters are disabled
keep-alive-time: 0s
keep-alive-timeout: 20s
keep-alive-permit: false
fail-fast: false
# allow-insecure will be taken into consideration if address has no protocol defined, if true then grpc or else grpcs
allow-insecure: false
tlsCACerts:
# Certificate location absolute path
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config/peerOrganizations/org1.hf.chainhero.io/tlsca/tlsca.org1.hf.chainhero.io-cert.pem
peer1.org1.hf.chainhero.io:
# this URL is used to send endorsement and query requests
url: localhost:8051
# eventUrl is only needed when using eventhub (default is delivery service)
eventUrl: localhost:8053
grpcOptions:
ssl-target-name-override: peer1.org1.hf.chainhero.io
# These parameters should be set in coordination with the keepalive policy on the server,
# as incompatible settings can result in closing of connection.
# When duration of the 'keep-alive-time' is set to 0 or less the keep alive client parameters are disabled
keep-alive-time: 0s
keep-alive-timeout: 20s
keep-alive-permit: false
fail-fast: false
# allow-insecure will be taken into consideration if address has no protocol defined, if true then grpc or else grpcs
allow-insecure: false
tlsCACerts:
# Certificate location absolute path
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config/peerOrganizations/org1.hf.chainhero.io/tlsca/tlsca.org1.hf.chainhero.io-cert.pem
#
# Fabric-CA is a special kind of Certificate Authority provided by Hyperledger Fabric which allows
# certificate management to be done via REST APIs. Application may choose to use a standard
# Certificate Authority instead of Fabric-CA, in which case this section would not be specified.
#
certificateAuthorities:
ca.org1.hf.chainhero.io:
url: http://localhost:7054
# Fabric-CA supports dynamic user enrollment via REST APIs. A "root" user, a.k.a registrar, is
# needed to enroll and invoke new users.
httpOptions:
verify: false
registrar:
enrollId: admin
enrollSecret: adminpw
# [Optional] The optional name of the CA.
caName: ca.org1.hf.chainhero.io
tlsCACerts:
# Certificate location absolute path
path: ${GOPATH}/src/github.com/chainHero/heroes-service/fixtures/crypto-config/peerOrganizations/org1.hf.chainhero.io/ca/ca.org1.hf.chainhero.io-cert.pem
entityMatchers:
peer:
- pattern: (\w*)peer0.org1.hf.chainhero.io(\w*)
urlSubstitutionExp: localhost:7051
eventUrlSubstitutionExp: localhost:7053
sslTargetOverrideUrlSubstitutionExp: peer0.org1.hf.chainhero.io
mappedHost: peer0.org1.hf.chainhero.io
- pattern: (\w*)peer1.org1.hf.chainhero.io(\w*)
urlSubstitutionExp: localhost:8051
eventUrlSubstitutionExp: localhost:8053
sslTargetOverrideUrlSubstitutionExp: peer1.org1.hf.chainhero.io
mappedHost: peer1.org1.hf.chainhero.io
orderer:
- pattern: (\w*)orderer.hf.chainhero.io(\w*)
urlSubstitutionExp: localhost:7050
sslTargetOverrideUrlSubstitutionExp: orderer.hf.chainhero.io
mappedHost: orderer.hf.chainhero.io
certificateAuthorities:
- pattern: (\w*)ca.org1.hf.chainhero.io(\w*)
urlSubstitutionExp: http://localhost:7054
mappedHost: ca.org1.hf.chainhero.io
docker-compose.yaml
version: '2'
networks:
default:
services:
orderer.hf.chainhero.io:
image: hyperledger/fabric-orderer:x86_64-1.1.0
container_name: orderer.hf.chainhero.io
environment:
- ORDERER_GENERAL_LOGLEVEL=debug
- ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
- ORDERER_GENERAL_LISTENPORT=7050
- ORDERER_GENERAL_GENESISPROFILE=ChainHero
- ORDERER_GENERAL_GENESISMETHOD=file
- ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
- ORDERER_GENERAL_LOCALMSPID=hf.chainhero.io
- ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
- ORDERER_GENERAL_TLS_ENABLED=true
- ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
- ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
- ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
working_dir: /opt/gopath/src/github.com/hyperledger/fabric-1.1.0
command: orderer
volumes:
- ./artifacts/orderer.genesis.block:/var/hyperledger/orderer/orderer.genesis.block
- ./crypto-config/ordererOrganizations/hf.chainhero.io/orderers/orderer.hf.chainhero.io/msp:/var/hyperledger/orderer/msp
- ./crypto-config/ordererOrganizations/hf.chainhero.io/orderers/orderer.hf.chainhero.io/tls:/var/hyperledger/orderer/tls
ports:
- 7050:7050
networks:
default:
aliases:
- orderer.hf.chainhero.io
ca.org1.hf.chainhero.io:
image: hyperledger/fabric-ca:x86_64-1.1.0
container_name: ca.org1.hf.chainhero.io
environment:
- FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
- FABRIC_CA_SERVER_CA_NAME=ca.org1.hf.chainhero.io
- FABRIC_CA_SERVER_CA_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.hf.chainhero.io-cert.pem
- FABRIC_CA_SERVER_CA_KEYFILE=/etc/hyperledger/fabric-ca-server-config/5da5c8049a9ec349ec4447c82a9c0f7db75b84012a78954ef083a9c9e4a9fa25_sk
- FABRIC_CA_SERVER_TLS_ENABLED=true
- FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.hf.chainhero.io-cert.pem
- FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/5da5c8049a9ec349ec4447c82a9c0f7db75b84012a78954ef083a9c9e4a9fa25_sk
ports:
- 7054:7054
command: sh -c 'fabric-ca-server start -b admin:adminpw -d'
volumes:
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/ca/:/etc/hyperledger/fabric-ca-server-config
networks:
default:
aliases:
- ca.org1.hf.chainhero.io
peer0.org1.hf.chainhero.io:
image: hyperledger/fabric-peer:x86_64-1.1.0
container_name: peer0.org1.hf.chainhero.io
environment:
- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
- CORE_VM_DOCKER_ATTACHSTDOUT=true
- CORE_LOGGING_LEVEL=DEBUG
- CORE_PEER_NETWORKID=chainhero
- CORE_PEER_PROFILE_ENABLED=true
- CORE_PEER_TLS_ENABLED=true
- CORE_PEER_TLS_CERT_FILE=/var/hyperledger/tls/server.crt
- CORE_PEER_TLS_KEY_FILE=/var/hyperledger/tls/server.key
- CORE_PEER_TLS_ROOTCERT_FILE=/var/hyperledger/tls/ca.crt
- CORE_PEER_ID=peer0.org1.hf.chainhero.io
- CORE_PEER_ADDRESSAUTODETECT=true
- CORE_PEER_ADDRESS=peer0.org1.hf.chainhero.io:7051
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.hf.chainhero.io:7051
- CORE_PEER_GOSSIP_USELEADERELECTION=true
- CORE_PEER_GOSSIP_ORGLEADER=false
- CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
- CORE_PEER_LOCALMSPID=org1.hf.chainhero.io
- CORE_PEER_MSPCONFIGPATH=/var/hyperledger/msp
- CORE_PEER_TLS_SERVERHOSTOVERRIDE=peer0.org1.hf.chainhero.io
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
command: peer node start
volumes:
- /var/run/:/host/var/run/
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/peers/peer0.org1.hf.chainhero.io/msp:/var/hyperledger/msp
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/peers/peer0.org1.hf.chainhero.io/tls:/var/hyperledger/tls
ports:
- 7051:7051
- 7053:7053
depends_on:
- orderer.hf.chainhero.io
links:
- orderer.hf.chainhero.io
networks:
default:
aliases:
- peer0.org1.hf.chainhero.io
peer1.org1.hf.chainhero.io:
image: hyperledger/fabric-peer:x86_64-1.1.0
container_name: peer1.org1.hf.chainhero.io
environment:
- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
- CORE_VM_DOCKER_ATTACHSTDOUT=true
- CORE_LOGGING_LEVEL=DEBUG
- CORE_PEER_NETWORKID=chainhero
- CORE_PEER_PROFILE_ENABLED=true
- CORE_PEER_TLS_ENABLED=true
- CORE_PEER_TLS_CERT_FILE=/var/hyperledger/tls/server.crt
- CORE_PEER_TLS_KEY_FILE=/var/hyperledger/tls/server.key
- CORE_PEER_TLS_ROOTCERT_FILE=/var/hyperledger/tls/ca.crt
- CORE_PEER_ID=peer1.org1.hf.chainhero.io
- CORE_PEER_ADDRESSAUTODETECT=true
- CORE_PEER_ADDRESS=peer1.org1.hf.chainhero.io:7051
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.hf.chainhero.io:7051
- CORE_PEER_GOSSIP_USELEADERELECTION=true
- CORE_PEER_GOSSIP_ORGLEADER=false
- CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
- CORE_PEER_LOCALMSPID=org1.hf.chainhero.io
- CORE_PEER_MSPCONFIGPATH=/var/hyperledger/msp
- CORE_PEER_TLS_SERVERHOSTOVERRIDE=peer1.org1.hf.chainhero.io
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
command: peer node start
volumes:
- /var/run/:/host/var/run/
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/peers/peer1.org1.hf.chainhero.io/msp:/var/hyperledger/msp
- ./crypto-config/peerOrganizations/org1.hf.chainhero.io/peers/peer1.org1.hf.chainhero.io/tls:/var/hyperledger/tls
ports:
- 8051:7051
- 8053:7053
depends_on:
- orderer.hf.chainhero.io
links:
- orderer.hf.chainhero.io
networks:
default:
aliases:
- peer1.org1.hf.chainhero.io
docker-撰写-couch.yaml
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
version: '2'
services:
couchdb0:
container_name: couchdb0
image: hyperledger/fabric-couchdb
environment:
- COUCHDB_USER=
- COUCHDB_PASSWORD=
# Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
# for example map it to utilize Fauxton User Interface in dev environments.
ports:
- "5984:5984"
peer0.org1.hf.chainhero.io:
environment:
- CORE_LEDGER_STATE_STATEDATABASE=CouchDB
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:7051
- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
depends_on:
- couchdb0
couchdb1:
container_name: couchdb1
image: hyperledger/fabric-couchdb
environment:
- COUCHDB_USER=
- COUCHDB_PASSWORD=
# Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
# for example map it to utilize Fauxton User Interface in dev environments.
ports:
- "6984:5984"
peer1.org1.hf.chainhero.io:
environment:
- CORE_LEDGER_STATE_STATEDATABASE=CouchDB
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb1:5984
- CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
- CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
depends_on:
- couchdb1
couchdb2:
container_name: couchdb2
image: hyperledger/fabric-couchdb
environment:
- COUCHDB_USER=
- COUCHDB_PASSWORD=
# Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
# for example map it to utilize Fauxton User Interface in dev environments.
ports:
- "7984:5984"
# peer0.org2.example.com:
# environment:
# - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
# - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb2:5984
# - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
# - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
# depends_on:
# - couchdb2
#
# couchdb3:
# container_name: couchdb3
# image: hyperledger/fabric-couchdb
# environment:
# - COUCHDB_USER=
# - COUCHDB_PASSWORD=
# # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
# # for example map it to utilize Fauxton User Interface in dev environments.
# ports:
# - "8984:5984"
#
# peer1.org2.example.com:
# environment:
# - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
# - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb3:5984
# - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
# - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
# depends_on:
# - couchdb3
假设是 compose-docker-douch.yaml 中的端口有问题，我需要更改吗：
peer0.org1.hf.chainhero.io:
...
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:7051
到
peer0.org1.hf.chainhero.io:
...
- CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:5984