Keras 模型连接：属性和值错误

Question

这是我根据 Liu, Gibson, et al 2017 (https://arxiv.org/abs/1708.09022) 的论文制作的 keras 模型。如图1.

我有3个问题-

我不确定我是否按照论文正确使用了连接。
我收到 AttributeError: 'KerasTensor' object has no attribute 'add' on model4.add flatten。这个错误没有早点出现
之前，唯一的错误是 ValueError：Concatenate 层需要具有匹配形状的输入，但连接轴除外。得到输入形状：[(None, 310, 1, 16), (None, 310, 1, 32), (None, 310, 1, 64)]，我我也不知道怎么处理。

model1= Sequential()
model2= Sequential()
model3= Sequential()
model4= Sequential()

input_sh = (619,2,1)

model1.add(Convolution1D(filters=16, kernel_size=21, padding='same', activation='LeakyReLU', input_shape=input_sh))
model1.add(MaxPooling2D(pool_size=(2,2), padding='same')) 
model1.add(BatchNormalization())
model1.summary()

model2.add(Convolution1D(filters=32, kernel_size=11, padding='same', activation='LeakyReLU', input_shape= input_sh))
model2.add(MaxPooling2D(pool_size=(2,2), padding='same'))
model2.add(BatchNormalization())
model2.summary()

model3.add(Convolution1D(filters=64, kernel_size=5, padding='same', activation='LeakyReLU', input_shape= input_sh))
model3.add(MaxPooling2D(pool_size=(2,2), padding='same'))
model3.add(BatchNormalization())
model3.summary()

model4 = concatenate([model1.output, model2.output, model3.output], axis= -1)

model4.add(Flatten()) # Line with error
model4.add(Dense(2048, activation='tanh'))
model4.add(Dropout(.5))
model4.add(Dense(len(dic), activation="softmax")) #len(dic) = 19
model4.summary()

输出结果如下-

Model: "sequential_59"
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
conv1d_45 (Conv1D)           (None, 619, 2, 16)        352       
_________________________________________________________________
max_pooling2d_45 (MaxPooling (None, 310, 1, 16)        0         
_________________________________________________________________
batch_normalization_45 (Batc (None, 310, 1, 16)        64        
=================================================================
Total params: 416
Trainable params: 384
Non-trainable params: 32
_________________________________________________________________
Model: "sequential_60"
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
conv1d_46 (Conv1D)           (None, 619, 2, 32)        384       
_________________________________________________________________
max_pooling2d_46 (MaxPooling (None, 310, 1, 32)        0         
_________________________________________________________________
batch_normalization_46 (Batc (None, 310, 1, 32)        128       
=================================================================
Total params: 512
Trainable params: 448
Non-trainable params: 64
_________________________________________________________________
Model: "sequential_61"
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
conv1d_47 (Conv1D)           (None, 619, 2, 64)        384       
_________________________________________________________________
max_pooling2d_47 (MaxPooling (None, 310, 1, 64)        0         
_________________________________________________________________
batch_normalization_47 (Batc (None, 310, 1, 64)        256       
=================================================================
Total params: 640
Trainable params: 512
Non-trainable params: 128
_________________________________________________________________
---------------------------------------------------------------------------
AttributeError                            Traceback (most recent call last)
<ipython-input-25-bf7ad914aa4e> in <module>()
     44 model4 = concatenate([model1.output, model2.output, model3.output], axis= -1)
     45 
---> 46 model4.add(Flatten())
     47 model4.add(Dense(2048, activation='tanh'))
     48 model4.add(Dropout(.5))
 
AttributeError: 'KerasTensor' object has no attribute 'add'

Answer 1

您可以使用 Functional() API 来解决您的问题（我还没有读过这篇论文，但这里介绍了如何组合模型并获得最终输出）。

为了简单起见，我使用了 'relu' 激活（确保在 tensorflow 中使用 keras）

下面是应该有效的代码：

import tensorflow as tf
from tensorflow.keras import *
from tensorflow.keras.layers import *

model1= Sequential()
model2= Sequential()
model3= Sequential()

input_sh = (619,2,1)

model1.add(Convolution1D(filters=16, kernel_size=21, padding='same', activation='relu', input_shape=input_sh))
model1.add(MaxPooling2D(pool_size=(2,2), padding='same')) 
model1.add(BatchNormalization())
model1.summary()

model2.add(Convolution1D(filters=32, kernel_size=11, padding='same', activation='relu', input_shape= input_sh))
model2.add(MaxPooling2D(pool_size=(2,2), padding='same'))
model2.add(BatchNormalization())
model2.summary()

model3.add(Convolution1D(filters=64, kernel_size=5, padding='same', activation='relu', input_shape= input_sh))
model3.add(MaxPooling2D(pool_size=(2,2), padding='same'))
model3.add(BatchNormalization())
model3.summary()

concatenated = concatenate([model1.output, model2.output, model3.output], axis=-1)
x = Dense(64, activation='relu')(concatenated)
x = Flatten()(x)
x = Dropout(.5)(x)
x = Dense(19, activation="softmax")(x)
final_model = Model(inputs=[model1.input,model2.input,model3.input],outputs=x)
final_model.summary()





Model: "functional_3"
__________________________________________________________________________________________________
Layer (type)                    Output Shape         Param #     Connected to                     
==================================================================================================
conv1d_15_input (InputLayer)    [(None, 619, 2, 1)]  0                                            
__________________________________________________________________________________________________
conv1d_16_input (InputLayer)    [(None, 619, 2, 1)]  0                                            
__________________________________________________________________________________________________
conv1d_17_input (InputLayer)    [(None, 619, 2, 1)]  0                                            
__________________________________________________________________________________________________
conv1d_15 (Conv1D)              (None, 619, 2, 16)   352         conv1d_15_input[0][0]            
__________________________________________________________________________________________________
conv1d_16 (Conv1D)              (None, 619, 2, 32)   384         conv1d_16_input[0][0]            
__________________________________________________________________________________________________
conv1d_17 (Conv1D)              (None, 619, 2, 64)   384         conv1d_17_input[0][0]            
__________________________________________________________________________________________________
max_pooling2d_15 (MaxPooling2D) (None, 310, 1, 16)   0           conv1d_15[0][0]                  
__________________________________________________________________________________________________
max_pooling2d_16 (MaxPooling2D) (None, 310, 1, 32)   0           conv1d_16[0][0]                  
__________________________________________________________________________________________________
max_pooling2d_17 (MaxPooling2D) (None, 310, 1, 64)   0           conv1d_17[0][0]                  
__________________________________________________________________________________________________
batch_normalization_15 (BatchNo (None, 310, 1, 16)   64          max_pooling2d_15[0][0]           
__________________________________________________________________________________________________
batch_normalization_16 (BatchNo (None, 310, 1, 32)   128         max_pooling2d_16[0][0]           
__________________________________________________________________________________________________
batch_normalization_17 (BatchNo (None, 310, 1, 64)   256         max_pooling2d_17[0][0]           
__________________________________________________________________________________________________
concatenate_5 (Concatenate)     (None, 310, 1, 112)  0           batch_normalization_15[0][0]     
                                                                 batch_normalization_16[0][0]     
                                                                 batch_normalization_17[0][0]     
__________________________________________________________________________________________________
dense_5 (Dense)                 (None, 310, 1, 64)   7232        concatenate_5[0][0]              
__________________________________________________________________________________________________
flatten_3 (Flatten)             (None, 19840)        0           dense_5[0][0]                    
__________________________________________________________________________________________________
dropout_3 (Dropout)             (None, 19840)        0           flatten_3[0][0]                  
__________________________________________________________________________________________________
dense_6 (Dense)                 (None, 19)           376979      dropout_3[0][0]                  
==================================================================================================
Total params: 385,779
Trainable params: 385,555
Non-trainable params: 224

Keras 模型连接：属性和值错误

Keras model concat: Attribute and Value error

python

concatenation

deep-learning

keras

tensorflow